MediaMatrix nTouch 180 Manual descargar pdf (Pagina 43)

nTouch 180 Hardware Manual

March 27, 2015 Version 1.7.2.0 39

Scenario

Actions to take

domain name of a time server.

Note: If you are using a domain name to contact

the time server, a DNS must be present on the

network. If a DHCP server is not available on the

network, you must specify the IP address of the

DNS on the Network page for the local area

connection you are using.

3. In the Authority list, click time server.

4. Click Set.

Note: Once you select time server mode, you will

not be able to change the time or date settings.

On the other (slave) nodes:

1. Navigate to the Time and Timezone tab.

2. Clear the Time Server box.

3. In the Authority list, click normal.

4. Click Set.

Note: If you try to change the time and date

settings on the slave nodes, they will

automatically change to match the settings on the

time server node.

Copying media files to the nTouch 180

You can copy media files over to the nTouch 180 using FTP and then use them in your NWare

projects. This allows you to quickly change the available media in a project. You can also

minimize the size of the NWare project file by storing your media on the nTouch 180 and not

in the project file itself. You can use any FTP client to copy the files.

In order to allow files to be copied, you need to enable the FTP server on the node you are

using. This is done via the web interface. Once FTP is enabled, you can use an FTP client (or

the FTP command from a Command Prompt window) to copy files over.

Files on an nControl unit can be played using a Media Player device in your NWare design.

Files on a NION can be played using a Wave File Player device in your NWare design.

For more information on these devices, refer to the NWare Device Reference.

Notes:

 It is not currently possible to view the amount of available space for storing media files.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 57 58

Sin comentarios

MediaMatrix nTouch 180 Manual Pagina 43