MediaMatrix nTouch 180 Manual descargar pdf (Pagina 39)

nTouch 180 Hardware Manual

March 27, 2015 Version 1.7.2.0 35

 To specify a network interface for CAB control

1. On the Network screen, under CAB Control Interface, select a network interface for the

CobraNet network.

The details for the Local Area Connection interface are shown first, followed by the

details for Local Area Connection 2.

2. Click Set to confirm the action.

You will be asked to log on.

3. Specify your username and password. The default username is superuser; it has no

password.

4. Navigate to the Special screen.

5. Under Unit Shutdown in the action list, click reboot.

6. Click Do it.

Specifying an IP address for connecting to other network devices

The Pandad Windows service that runs on the NWare PC will detect the nTouch 180 unit using

a specified IP address and make it available in NWare. This IP address will also be used to

connect to other MediaMatrix devices on the network.

The nTouch 180 motherboard is fitted with two Ethernet ports. If both ports are used, two IP

addresses will be used. You will therefore need to specify which IP address to advertise to

Pandad.

If you have specified the IP addresses manually via the web interface, they will be displayed

under Local Area Connection and Local Area Connection 2 on the Network page. If you

are using DHCP, you will need to ask your systems administrator to look at the DHCP

configuration for your network to see how addresses have been allocated to interfaces on the

nTouch 180 unit.

 To specify an IP address for connecting to other network devices

1. On the Network screen, under Panda Interface, select an IP address to advertise to

Pandad on the control network.

The details for the Local Area Connection interface are shown first, followed by the

details for Local Area Connection 2.

2. Click Set to confirm the action.

You will be asked to log on.

3. Specify your username and password. The default username is superuser; it has no

password.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Sin comentarios

MediaMatrix nTouch 180 Manual Pagina 39